Neji-Saurus GT

After using this for quite some time, I discovered that it handled better on my hands than a 9-1/2,But due to its narrow width, when closed, I find it easier to strip conductors like #12AWG as my fingers have more control.I've used the crimper when I repaired my electric fan and it was really good. It did not damage the insulation of the crimp connectors I used for the fan capacitor. It's not a tool I will use to cut nails or steel wire, but just copper so I can't say about the longevity of its cutting knives. The handles opened and closed without sticking or being too loose. Removing stripped screw was no problem at all even with a 12mm diameter head. It also cut a 2-core No. 12 AWG NM cable with minimal effort. The handles looked odd but they will not slip off easily. I think the idea here was to create a lineman's pliers that can also remove screws. It may not appeal to full time trades persons, but for homeowners this is a good tool.They could have designed it to be ultra high leverage. In the photo, you may notice the pivot is not that close to the jaws yet. So this is like a conservative high leverage.The item itself is high quality & meets a specialized purpose.

[How is it used?
Removal of licked Screw

Was the one you received as per Image?
As per Image.

How was your experience with it?
The Spring in between makes it easy to make fine adjustments when inserting.
It requires a certain amount of grip strength, but even a screw with a round head could remove it. Even Screw, which has a round head, was able to remove it by squeezing it in.

[Points to note]
It cannot be used in tight spaces because it needs to be sandwiched.

The OEMHelmet holder is hidden when the Side bag is attached to REBEL250.
I didn't want to add more locks, so I looked into removing it.
It seems the holes have been smashed for security purposes.

So I did some research and came across Neji-saurus!

The removal method is described as a reminder.
If you wish to remove it yourself, do so at your own risk.
Also, please conduct only on your own Motorcycle.

Installation time:20 min.
Required tools:Ratchet wrench (10mm, 12mmSocket), 5mm, 6mmHexagonal Wrench, Neji-saurus GT

Remove MainSeat (5mm Hexagonal Wrench).
Remove the tandem seat (6mm Hexagonal Wrench).
Remove the Tandem seat fixing bolt (12mmSocket).
Remove the License Plate and Tail lamp (10mmSocket)
Remove the 3 pins under the MainSeat (push the middle with a thin stick to remove them).
Remove the RearCover.
Remove the Screw holding the OEMHelmet holder with the Neji-saurus GT.
The screws are easily removed by grabbing the frame and lifting it up to catch the screws.
? Dismounting complete
? All that's left is to reverse the procedure and put it back together!

There is a description that when the car is delivered or when the Rear tire is removed, it can only be removed by a contractor, etc., but I was able to DIY it with Neji-saurus.

It is effective in loosening bolts that have been over-tightened and broken, and screws that have rusted and are difficult to loosen with a screwdriver.
It bites firmly and can be loosened with a strong Torque.
It would be useful to have one in Garage.

I bought these for those odd times when you need to remove something round like a broken off bolt and they have saved me from hours of work over the time Ive owned them.The clever bit is the gripping part of the pliers, Ive tried to show it in my photo. This works how you always wished your normal pliers do when trying to remove a stuck round fixing.They are well made and easy to use. Recommended.