- It is needed for the part that connects to the Caliper when the Brake hose is replaced. I purchased RSOEMfor BREMBO Caliper with Straight Type & Blue 1mm thread pitch. It is not difficult to make, but...Weiterlesen
- I read on webike that lowering the resistance of the hydraulic path of the hydraulic clutch master lightens the lever operation, so I installed it.The Clutch master side used Banjo, so we routed it li...Weiterlesen
- I used a Nisshin 4-pot caliper on my ZrX1100, and this seemed to attach more neatly than using a banjo adapter. It went on nicely.Weiterlesen
- I bought this to install a NISSIN 4POTCaliper around NSR250R (MC21) on my Kawasaki Zr-7S.If I am going to go to the trouble of changing the hose, I wanted to make the Brake hose simple and parenthesis...Weiterlesen
- The Hose was replaced along with it.The Hose part was Red, so we installed Blue here.The color is nice, but you have to be careful not to overtighten or lick the corners when tightening so that the co...Weiterlesen
- I thought the Banjo adapter would hit the Handlebar, so I bought this one. It did what I thought it would do.Weiterlesen
- We are using ZrX400 in 1998. With the installation of Brembo caliper, this type was perfect.Torque wrench is necessary. I mean, it's essential around Brake. When installing on Caliper side It is d...Weiterlesen
- Earls remaining and combined with Fitting, but I can not fix it until the end Fitting can not be fixed.Loupe expanded Large and it seems that Screw has not been cut to the end and the rest 1 / Screw i...Weiterlesen
- Purchased for Nisshin's Semi-radial master. I used it for installing to Direct because the Banjo attachment part of MASTER becomes an obstacle if it is an ordinary thing. It's Joint so it'...Weiterlesen
- Because I changed to Tank Separated Type 's Horizontal Type MASTER I thought that it would be better to change the handling of Brake line I was looking for Banjo of 90 ° at the beginning but I was...Weiterlesen
- Although other Manufacturers may be the same one, if it does not bind tight and carry out, pressing [ a root does not have a screw thread by the side of a Caliper and ] down a Packing since the root p...Weiterlesen
- [Webike Monitor] Since he wanted to 直出 and carry out from a Front master by BMW F650GS, the Straight adapter of M10x1.0 for Brembo was used instead of the Banjo bolt.
The Refreshing and the Hose were...Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING