- JA55 Left hand Brake purchased for installationAt first, I assembled it with 45°, but I felt the Hose was compressed, so I replaced it with 20°,It was installed with natural handling.Weiterlesen
- I chose Stainless Steel because it was on sale at a lower price and I was told by an acquaintance that Aluminum can break.This time we have Grom JC92 for Rear with 20 degrees on MASTER side and Straig...Weiterlesen
- Purchased for front brake radipon conversion.Material by the fact that it is personally in direct contact with the outside air and subject to no small amount of pressure.:Stainless Steel was selected....Weiterlesen
- Used when turning back from Separator20° is optimal for this installationWeiterlesen
- There are a variety of shapes available for ideal handling when DIY BrakeWiring.Material:Stainless Steel and supposed to be semi-permanent.If only it were a little cheaper...Weiterlesen
- I purchased the Straight and 20 degree because I need them for my StainlessCrimpType Universal hose from Buildaline.Crimp, Banjo adapter and Bolt are all made of Stainless Steel, which is more durable...Weiterlesen
- For Adapter, the angle was good.Weiterlesen
- Used for rear caliper. black color makes it look like OEM.Weiterlesen
- Used on the Caliper side, it's black so it doesn't stand out and looks like OEM for a natural finish.Weiterlesen
- The Buildaline is of high quality and can be handled without difficulty by those who have a certain level of skill in maintenance. As this is a Buildaline, the angle and position of the twist is not f...Weiterlesen
- I bought and installed the Brake Caliper and Hose to unify the Black color. The appearance is good, but the color of Washer stands out? The color of the Washer stands out a little. I'm not sure if it'...Weiterlesen
- I purchased this for a GoodridgeHose conversion that has been used and proven.I don't need to critique ・・・・ the texture and build quality is adequate.Sorry, Webike, but Webike's product selection is R...Weiterlesen
- With the radialization of the Clutch master on the ZrX1200R, the 45 degree I needed an adapter, so I bought one, using Goodridge's Hose You can find out which manufacturer's adapter you can use at the...Weiterlesen
- I used it to adjust the angle when installing the Radial master and Mesh hoseIt is fun because you can choose various shapes for customizationThe bad point is that the installation is a large, but bec...Weiterlesen
- Stainless is the best reason to purchaseMaterial : Even though it is good for several years to install Aluminum, it will deteriorate as time goes on. If you think of Trouble as wellI can not actually ...Weiterlesen
- I tried this part of Stainless Steel where I was using Aluminum parts so far, and the Brake line was all Stainless Steel.When attaching, we settled with Torque as fast as described in the Instruction ...Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING