- They turn well!If you want to Bore up, Cam exchange is also recommended.Weiterlesen
- When all bolts were tightened during installation, the cam became heavy. When I checked, I found that the Bearing was not press-fitted properly, so I had to re-tighten it. Also, the Bearing was made i...Weiterlesen
- This cam works great with my 1969 z50a Monkey with 88cc bore kit and a ported stock head, 20 mm carburetor. Much faster, still has good idle. Throttle response is improved. works with stock valve spri...Weiterlesen
- I heard that the OEMCam is discontinued, and I bought it because other impresarios said it was about OEM+α!Weiterlesen
- The lift is larger than that of any other high camshafts, and the power is demonstrated in the high-rpm range.Weiterlesen
- So I purchased this for my Z125.
Was not confident enough to install it myself, so instead got a local mechanic to do it.
Not much directions on installation came with the product, but fortunately th...Weiterlesen - Install this camshaft for an upgrade improvement of you motorcycle's performance. It is also of a lightweight design, which is an added feature.RECOMMENDWeiterlesen
- For the price, these camshafts are a great bolt in upgrade. Definitely noticeable pep/power and revs rapidly. Would certainly recommend to anyone on the fence.Weiterlesen
- It's not an extreme High CamshaftIt's just a little bit above NORMALIt's better to be OEM Cams for Replacement than to install them for the purpose of increasing performance It seems goodPersonally, I...Weiterlesen
- Bore up and exhaust system to adjust the EnigmaFirst of all, it's not very good in terms of street driving If you build this, Idling will drop nearly 1000 rpm Therefore, it is quite unstable It should...Weiterlesen
- KITACOReinforced Clutch Kit, running test with incorporating 75ccLight bore upKIT, Torque in the low speed range is about the same as 400cc (I feel a little exaggerated) Although it was at the high re...Weiterlesen
- Rather than High Camshaft it is a choice Cam, feel like STREETCam.Normal cam adopted for 6 VC 70 (41Cam?) It is a Profile that is close to.Lift is the same and there is little overlap.Originally it is...Weiterlesen
- Pons attachment is useless.
I am dependent on adjustment of a Tappet, the angle of lead, a carburetor, etc., and think that the engine performance comes out.
We recommend you.
Weiterlesen - When an STD Version up kit was attached, it exchanged together.
It seems that it is measurement by ascent since the straight line of the flat ground which can be tried is not closely alike, but it i...Weiterlesen - Although a low speed falls, the part high speed is useful!! * which is a Recommendation in the direction which is peevish (^_^;) br(s), > flies and rides without being able to carry out a Recommendati...Weiterlesen
- [Webike Monitor] It equipped simultaneously with 75-cc Bore up and CARBURETOR change.
I feel that it came to turn to high rotation compared with the Normal cam.
I think that it is a comparatively ...Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING