135.74 EUR
(22,123 JPY)
4 (2 Bewertungen)
Average
One more sense of FitI was in use and I ran over 3000 kilometers with this Helmet.
Although it depends on people, I think that it is slim but not ella in particular, but both SHOEI and ARAI were Just fit with M Size, but in this case it is Small in M ??Size. Especially? Is tight.
I changed it to L Size of Cheek pad, but it was still tight and carved Sponge with Scissors as I was in the Instruction Manual, but I did not improve it anymore.
One of the reasons is that the Cheek pad's Urethane sponge is somewhat stiff and I think there is something unchanged in shape even after a while.
In one week's Long touring, because it is tightening in the evening and the jaw hurts, it is hard. As it is thought that I'm getting used to, I can not get used to it even when I travel 3000 km.
Reviews For WINS X-ROAD Helm From Other Webike User
Very Good
Cospa strongestAs the helmet I am using now has been over 3 years, I was thinking about replacing OffHelmet with Shield, initially thought about ARAI's tour cross, but I definitely did not like Chin guard's design, SHOEI Also I am not familiar with the current ADV design, I bought AFX's FX - 41 DS and Yu made In foreign shields Helmet with Inner Shield at the end of last year, but I do not feel like using Shield 's distortion severely As a result, I reached the X-ROAD of this WINs.
I like Design on my own.
At around 100 kilometers per hour the influence of wind pressure on Visor was not much. Since the angle of the Visor can be adjusted, I think that Lift by wind pressure can be suppressed even if it is lowered.
It felt quite quiet than I thought I felt when I ran. Shield 's close contact with Cheek Pad is good I wonder if Standard is muted Ear Pad is attached. Once Cheek Pad was removed, it was supposed to be attached to Helmet side by Velcro.
Size is usually LA size when it is ARAI, but as I confirmed with Homepage of WINs this time I felt that it was the same Size in XL so I ordered with XL but it was Just size.
Shield's distortion is also the least among OffHelmet with Shield which I have now.
The chin strap of Ratchet Type Buckle initially had a sense of incongruity around his throat but soon got used to it.
Chin guard is also comfortable with Ventilation Shutter.
With InnerLens with Shield, you get the Anti-FogSeat when you issue the attached postcard.
It is truly Cospa's strongest.
I put the image but Option with Rainbow mirrorShield and Chin curtain attached.
View Detail
Most Viewed Reviews Of WINS Dirtbike Helmets
Very Good
Mr. Wynns, I have a request.I use MSize because L is too large for me. I have a flat head, so my head hurts when I wear it for a long time. I wish I could get it fitted at the shop, but I adjust the size by using scraps of Styrene. The fog-in is also great.
Main topic.
Inner Visor needs a polarizing feature!
West sun is dangerous.
It's like when you enter a tunnel with your sunglasses on. The cars around me look like a wall (or am I?).
Can you please develop an Inter Visor with polarization function?
View Detail
Excellent
Design is not so good, but performance is good.I recently had my helmet stolen at a civic center outside of my workplace for work reasons, so I quickly bought this one from a nearby motorcycle shop that had it in stock.
With Shield (with anti-fogging function) And since Off-roadDesign's Matte Black was the only one available, Chin curtain was also available in Quantity.:I bought it as a set
Compared to the Hjc DSX1 and the GibsonNew Model, the interior texture and fit is by far better and better.
The hjc and Gibson, even with the chin curtain on, are so cold and windy.
And this one comes with Sunshade.
There is no need to be afraid of shine after rain or snowfall.
I was annoyed that it was stolen, but I gained some experience with Helmet, which I had never intended to buy before.
It is a good Helmet.View Detail
Average
Good Helmet considering the priceBecause the SZ of ARAI which I used in Main greeted the life, I replaced it with FREE RIDE which I had been interested in from before. the Off system Helmet with Shield is the 4th following TX-Motard of Arai, SUPERMOTO TAO of HJC, HONET ADV of SHOEI It becomes the fourth.
I've been using it.
The texture of the matte graphic is good, and I am satisfied with the large design.
In the case of FREE RIDE, I felt that it was a little tight, but I think that it will fit while using it.
The chinstrap of Ratchet Type is divided into pros and cons, but I like it because it is easy to put on and take off even if I wear gloves. However, because the position of the chinstrap is backward, I feel a little tightness.
The cap is a little large in size and a little shallow in the back.
Because the Knob for opening and closing the Shield is in the ShieldCenter, it is difficult to open it.
I think that the quietness is high, but the wind cutting sound becomes large around 60km/h, so I felt that the information of the engine sound etc. is a little difficult to hear. However, it is not a beeping sound, so I think it is not grating.
Inner Visor is a little dark, but very useful.
Ventilation works on the head side, but hardly works on the chin guard side.
Good points and bad pointsThere are some good points, but I think it is a good Helmet considering the price of 20,000 yen.
I felt that it was the next best thing to HOEI's HONET ADV and Arai's TX-Motard when compared to the Off Helmet with Shield that I have used.View Detail
Excellent
It was cooler than the picture.I thought it would be Lame.
It is a large thing that it is not overlooked in the mountain and the night, etc. though austere color was good, and it is bright color.
White is Blue, if you want to buy a new one, because it has been White for a long time.
Blue on Yamaha Blue.......
Ventilation is good, but it would be nice if the shield could be opened a little bit, so I deducted one point.
I think the shape of the head and the Size feeling is the same as a domestic Helmet in general.
(From OGK KAMUI2.... I wonder how many years I've been wearing it...)
Visor for city driving is not convenience equipment, it's safety equipment.
I think the reduction of fatigue is the most important safety.View Detail
Average
I bought it, I put it on.The cap is narrow. Hard to wear and tight on the cheeks and ears; Shield has some image distortion. It is good looking. Internal Shield is useful but not really necessary because of the shelter.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING