Less vibration transferred through the frame to your feet and hands

About quality and texture: I am happy with the quality of the engine reinforced plate from G-Craft. Made from aluminium and machined to allow for high strength and light weight. About the feeling of use: The engine reinforced plate allows for an addition connection between the engine and the frame which leads to a noticable reduced movement and vibration. Products to buy together: A set of steering stem stabilizers from Outex would also be desirable to purchase alongside the engine reinforced plate to also add some reinforcement to the steering. Difficulty of installation: The process to install takes about 20 minutes, position the engine reinforcment plate and install the 4 bolts into the engine followed by the 6 bolts that clamp the plate around the frame. Not difficult to do. Cost performance and comparison with other products: High costing but you are getting a beauitfully designed product made from quality aluminium stock. With there being no other branded product like this there are non to compare. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking finely detail your Grom then go for it. View Detail

Very well made, smaller than expected but the results are brilliant. Bike vibrates like a paint shaker as before, but the high frequency numbing vibrations have been dulled/removed from the experience.View Detail

I bought the one for Grom because it is a common Frame, but I bought the one for JB-02MONKEY125. Not available." It was
Looking at the original and the service manual, I found that the obstruction was the part for attaching the plate that holds the exhaust pipe (the part that wraps around the exhaust pipe under the engine) = it is additionally welded to the frame.
However, the above standard installation plate is a simplified version of this product in terms of functionality.
Specifically, there is an approximation in the sense that the two Bolt locations under the Engine (this product has four Bolt locations) are connected to the Frame.
It was also frustrating to put back the OEM parts that we had taken the trouble to remove, so we prepared the following parts for the installation of this product. Vibration Damping Washer M2052 I incorporated it into the return of the M8 and M10 of the +Rear Sets (also incorporated into the Footpeg installation portion of the +Rear Sets).

This product has nothing to do with the footpeg, but it has relieved the vibration of the footpeg, which I was having trouble with! I bought this product for this effect and prepared a vibration suppression washer, but if the product had been installed, the effect would have been even greater. 。 It looks like it cannot be installed without Frame modification.View Detail

I changed to this one because the serviceability is better than NORMAL, and I'm satisfied with the construction.View Detail

he thought that it probably adhered well and bought it A thing is good too. truly, G Craft description is also kind and which die length is where -- etc. -- very kind Since a Clutch cover is different.Naturally, although several are different, they suit almost. It was about three to have bought it with the addition. It was impressed that the plate Screw of the generator was a hexagon socket. Since it licked here, it was saved in that of the method of したっ in the hexagon head.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is titanium. About the feeling of use, This is sold as a replacement titanium nut and pairs perfectly with my previously purchased Kitaco Neo kit. Products to buy together, This titanium nut is designed to lighten the valve train when compared to the original Honda one, if you wished to further reduce weight in this area replacing the rocker arm with light weight parts would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the replacement titanium nut for my installation was easy due to having checked and adjusted my valve clearances many times, the replacement of the nuts was only a minor difference. Cost performance and comparison with other products, The pricing of the product is high for a nut but you are receiving a titanium nut to increase performance by removing weight and lighten the load on he vale train. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is lead with a silver finish.About the feeling of use, After replacing my own tyres I could see the wheels were out of balance, since the Honda Grom wheels are only 12 inches in diameter this was not noticable while riding at my usual speeds but I wished to remedy this for riding at higher speeds. Products to buy together, Kitaco have hollow axles in different lengths that can be used on the front and rear wheel axles, these can be added to your cart to further fine tune performance via weight on the Grom.Difficulty of installation, I can say the fitment of the wheel balancer weights for my installation was simple as access is straight forward and the nature of securing the weights to the outer diameter of the wheel is simple with the included adhesive. Cost performance and comparison with other products, The pricing of the product is good. You receive four 5 gram and four 10 gram weights totalling 60 grams, made from a quality material with a quality finish. There is a cheaper options from Battle Factory that I will try for my next lot of tyre changes.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use, two 3 x 8.5 rollers are needed for the new engine that I am building from newly purchased parts from Honda. It has done it's job completing the SP Takegawa 5 speed transmission kit. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the 3 x 8.5 roller is the SP Takegawa 5 speed transmission kit. Difficulty of installation, I can say the fitment of the 3 x 8.5 rollerfor my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda 3 x 8.5 roller that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a black finish.About the feeling of use, A better looking and performing rear wheel axle then the original Honda part with the black finish aligning with the black swing arm and light weight hollowed design assisting with less unsprung weight.Products to buy together, Kitaco have different length axles that can be used on the swing arm pivot and front wheel axles and they can be added to your cart to further reduce the unspring weight on the Grom.Difficulty of installation, I can say the fitment of the rear wheel axle for my installation was simple as access is straight forward and the nature of securing the axle between the swing arm is simple.Cost performance and comparison with other products, The pricing of the product is great. You receive an axle made from a quality material with a quality finish. There are no cheaper options with this lightweight design that I could find and the original Honda part is only sligthly cheaper.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel. About the feeling of use, One 15mm thrust washer is needed for the new engine that I am building from newly purchased parts from Honda. It has done it's job completing the SP Takegawa 5 speed transmission kit. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the one to purchase together to complete the installation of the 15mm thrust washer is the SP Takegawa 5 speed transmission kit. Difficulty of installation, I can say the fitment of the 15mm thrust washer for my installation was very easy due to already having access as the crankcase half is new and the process is explained in the service manual. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda 15mm thrust washer that will be suitable for engine builds and repairs and I do not see this being offered any cheaper elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail