Aluminium-Schmiederäder M7RS Genesi [Genesi] Satz vorne und hint

[Size / weight]
・Front rim: 3.50-17/3.29kg
・Realim: 6.00-17/4.00kg

[Type] Street

[Product Category]
・Aluminum wheels
・For Street (High Performance Street Wheels)
*Racing use possible

[Material]
・Aluminum for forging (Al) AA6009 / T1
・A7075 series (Super duralumin)

[Finish] High quality urethane paint

[Adaptable sprocket type] OEM use

[Standard sprocket size (OEM)] #A525-44T

[Recommended sprocket size (marchesini)] #A525.44

[manufacturing process]
・Forging method (Forged)
・Hot forging
・Exclusive Mold
・Multi-directional simultaneous press forging (Total Formed Forging System)
・15,000-ton class forging press
・Final shape cutting and finishing by CNC (computer controlled)

[Components] Aluminum air valve (L (90 degree) specification)

[Specification]
・It can be used for racing
・7-spoke
・New ring type damper system adopted
JWL standard compliant product

[Country of Origin] Italy (MADE IN ITALY)

[Manufacturers]
Brembo S.p.A.
Via Brembo.25 24035 CURNO(BG)Italy

**Image may contain other colors.
*Special sprockets are sold separately.
*The color of the wheel may look different from the actual color due to the shooting and display screen.
*The image shows the shape of the spokes, and the shape of the hub may vary depending on the vehicle.
*The design of the rim is slightly different for street / racing due to the adaptation to the purpose of use.
[Display of wheel weight (measurement conditions)]
*The wheel weight displayed is the "wheel assembly weight" which includes the weight of fitting parts such as bearings, side collars and sprocket holders.
*Weights are measured on the assumption that the same components are used for both the stock wheel and the Marchesini wheel - the weight of the wheel alone, without the components, does not allow a proper comparison due to the differences in construction.
*In order to accurately compare the weight of the wheel with that of the stock-installed wheel, the weight measurement is standardized to the following conditions.
*[FRONT WHEEL] = measurement of the weight with the wheel removed from the vehicle body and the tire and disc rotor removed.
*[REAR WHEEL] = measurement of the weight with the wheel removed from the vehicle body and the tire, disc rotor and sprocket removed.
*"OEM ratio" is the ratio of weight reduction possible when comparing the weight of a Marchesini wheel to the weight of a stock (OEM) wheel under the same measurement conditions.(The larger the minus value, the lighter the wheel is compared to the stock wheel.)
[About the sprockets]
*For street use, unless there is a significant change in the tire size to be combined with the wheel change, the "stock standard size sprocket" should be selected as a general rule.
*Even if the rear tire size is changed by changing the wheel, the next change is considered as no change in tire diameter.
*170/60ZR17 ⇔ 180/55ZR17 ⇔ 190/50ZR17.
*The recommended sprocket size is different from the stock standard size in some models, but these models have a relatively large change in tire diameter by changing wheels and tires.

[About Metal series (gold anodized finish) products]
Anodized aluminum products are finished by coloring with anodizing.
Please understand that anodizing has the following characteristics and weak points.
●Machining marks caused by cutting
The wheel is produced by machining.
Since products as large as wheels are processed and finished by "total machining, " there will be fine "cutting marks" on the products.
We evaluate such "cutting marks" in terms of finishing, considering the wheel as a functional part.
●Anodized aluminum treatment
Anodizing is applied as a finishing of the wheels.
Anodizing is a process that creates an anodic oxide film on the aluminum surface, which has the advantage of improving corrosion and corrosion resistance, but because it is a process that applies a film to the surface of the product, it cannot hide the "cutting marks" described in the previous section, unlike a painted finish.
Also, unlike a painted finish, the color of the product may vary in shade and unevenness.
●Product quality criteria
Anodized aluminum products are delivered after being evaluated in consideration of the anodized aluminum products characteristics.
The products delivered are basically in the range of good products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..