Warum ist es notwendig?
Wie können wir die gegensätzlichen Themen "Kühleffizienz" und "Schutzleistung" unter einen Hut bringen?
Die Insekten fliegen auf den kleinen Stein und den Müll, die vom Vorderreifen aufgerollt wurden .... etc.
Diese beschädigen den Kühlerkern aus Aluminiumlamellen.
Wenn die Rippe gequetscht wird, geht die Kühlwirkung verloren, und in einigen Fällen besteht die Gefahr, dass die WaterLine beschädigt wird und ein Kühlmittelleck entsteht.....
Merkmale aus dem Werk Ätzen
Der Kühler-Kernschutz der Ätzfabrik wurde viele Male getestet, hauptsächlich beim 8-Stunden-Langstreckenrennen im Sommer, dem schwersten Rennen für Radiator.
Die Platzierung des MeshPattern, die Dicke der MeshLine und das Öffnungsverhältnis sind voll von Rückmeldungen aus der Rennszene.
Feiner Mittelbereich und grobes HexagonalMeshPattern auf beiden Seiten.
Dadurch wird sichergestellt, dass die kleinen Steine und der Müll, die vom Vorderreifen abgeschleudert werden, durch ein feines Netz in der Mitte geschützt werden, das der Reifenbreite entspricht.
Das grobe Gewebe auf beiden Seiten der SIDE ist mit einem Öffnungsverhältnis ausgelegt, das die gegensätzlichen Themen "Kühleffizienz" und "Schutzleistung" ausgleicht.
Es gibt einen Grund, warum wir uns für Material entschieden haben...
Bei Aluminium und Titan kann die MeshLine-Breite nur durch Reduzierung der Blechdicke erreicht werden (Stärke) , sondern durch die Verwendung von Edelstahl (SUS304 0,5 t) kann die ideale Linienbreite erreicht werden, ohne die Stärke zu reduzieren.
In Anbetracht des oben Gesagten verfügt der Core Guard nicht nur über die Elemente, um die Leistung aufrechtzuerhalten, sondern auch über den Dress-up-Effekt, um die Schönheit des Benutzers anzusprechen.
Schützen und bezaubern.
Für Ihre Large Sore Machine empfehlen wir sie mit Vertrauen!.
Emblem ist in fünf Farben erhältlich.
Wählen Sie die Koordinaten, die dem Kragen Ihrer Maschine entsprechen.
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and debris rolled up from the front tires, insects flying at the lights...etc.
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
■There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.5t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
The emblem is available in five colors.
Choose a coordinating color to match the color of your machine.