- Motorradteile
- Motorteile
- Zündungsteile
- Zündkerzen
- NGK
- NGK - Zündkerzen
- Produktliste
- Standard-Stecker LMAR9E-J 6884
Standard-Stecker LMAR9E-J 6884
Product # LMAR9E-J
9.74 EUR (1,587 JPY)
List price: 9.74 EUR Save 0%
+16 Webike Punkt (0.09 EUR)
Product # LMAR9E-J
9.74 EUR (1,587 JPY)
List price: 9.74 EUR Save 0%
+16 Webike Punkt (0.09 EUR)
[NGK-Stecker-Funktionen] |
- Es ist ein Super-"Wide Range"-Stecker - |
Die zentrale Elektrode ist mit einem Kupferkern konstruiert, der bis zur Spitze umschlossen ist, um eine große Wärmemenge schnell abzugeben.. Als Ergebnis wurde ein Ultra-Weitbereichspfropfen erreicht, der resistent gegen Brennen und Schwelen ist.. |
Vergleicht man die thermischen Eigenschaften von Steckern mit und ohne Kupferkern, so zeichnen sich Stecker mit Kupferkern durch hervorragende thermische Eigenschaften und Fleckenbeständigkeit aus und haben einen größeren thermischen Bereich.. |
Heizwert des Steckers |
- Das hochtonerdehaltige Porzellan von New Ceramics wird als Isolator verwendet. |
Ausgezeichnete Isolierung bei hohen Temperaturen und zuverlässige Funkenbildung. Gute Wärmeleitfähigkeit zur Vermeidung von Überkochen. Ausgezeichnete mechanische Festigkeit und Beständigkeit gegen Wärmeschock (schnelles Aufheizen und Abkühlen). |
- Die Struktur ist stark und luftdicht - |
Ausgezeichnete Luftdichtheit und strukturelle Festigkeit, da der Isolator und die Hauptarmaturen durch Spezialpulver verbunden sind.. |
Spezielle Elektroden aus einer Nickellegierung werden für eine ausgezeichnete Haltbarkeit verwendet.. |
- Wellungen im Isolator gewährleisten die Isolierung und verhindern Überschläge. |
Zwischen dem Terminal und den Hauptanlagen im Park wird ständig Hochspannung angelegt.. Hohe Spannungen neigen dazu, entlang der Oberfläche des Isolators zu streuen, und je höher die erforderliche Spannung zwischen den Funkenstrecken ist, desto wahrscheinlicher wird ein Überschlag auftreten.. Um einen Überschlag zu verhindern, sind Isolatorwellungen vorzusehen und der Abstand zwischen der Klemme und den wichtigsten Metallteilen zu vergrößern, um die Isolierung zu gewährleisten und einen Überschlag zu verhindern.. |
Was ist ein Flashover... |
Der Funke soll zwischen dem Terminal und der Hauptarmatur überspringen, wie auf dem Bild zu sehen. |
Überschlag |
Ausgezeichnete Stecker. |
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
4.5 / 5
750 Bewertungen
Fits: YAMAHA MT-10 17-21, YAMAHA MT-10 SP 17-21, YAMAHA YZF-R1 09-21
Changing the spark plugs and sticking with the standard OEM ones. LMAR9E-j are the ones for my bike. Cost effective with Webike. Shipping is really good value if combined. Arrived in 100% condition and all plugs work great. Was a little worried there would be a duff but no, excellent. Fitting is hard as there is a lot to remove beforehand. Took a while but these new plugs have made the world of difference. View Detail
Fits: YAMAHA MT-10 17-21, YAMAHA MT-10 SP 17-21, YAMAHA YZF-R1 09-21
Purchased as replacements for my Yamaha MT10. These are the stock spark plugs but you simply cannot get any better than the NGK brand. Work every time, relatively easy to fit if you take a lot of parts off first lol.Yes, you can probably find fakes all over the internet but why risk paying around the same when you can buy the genuine ones from Webike and know you are getting exactly what you pay for.Easy to find on Webike's website. Shipping was average price, packaging, flawless as always. Arrived in one piece, no issues, bike runs brilliantly now.Thanks WebikeView Detail
Fits: YAMAHA MT-10 17-21, YAMAHA MT-10 SP 17-21, YAMAHA YZF-R1 09-21
It seems to be a Plug for CROSSPlain.
It is the same as the one used by OEM and the quality is sure.
I just felt the price was too high.View Detail
Fits: YAMAHA MT-10 17-21, YAMAHA MT-10 SP 17-21, YAMAHA YZF-R1 09-21
YZF-R1 (rn24j) It is used for
This is the first time I have ever replaced it.
I haven't had any problems with it so far.
I think I will use this product again next time as it is the only one that fits my R1.View Detail
Fits: YAMAHA MT-10 17-21, YAMAHA MT-10 SP 17-21, YAMAHA YZF-R1 09-21
Because it is a special product, there is only this choice of plug, and the price is 1600 yen, and the price is the same as Iridium plugs. Moreover, since it is about 1.4 times longer than ordinary plugs because of long reach, it has to be turned for a while.
As for the performance, because it is a special-purpose product, it is neither acceptable nor unacceptable. There was a thing with Gap of 0.7mmLimit and a thing that is over, though the corner of the electrode was standing when I looked at the Plug that ran for about 10000km.
Although the plug replacement standard of NGK is 3000-5000km and the owner's manual says it is every 13,000km or 12 months, I replaced it by the number of times when the plug ignited. The calculation formula is calculated with the replacement period (10,000km) = 5000 (10,000 for Iridium plugs) & divide; normal speed (rpm)View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Bitte wählen Sie Option, bevor in den Warenkorb legen.
Kundendienst
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.