Halsband : Silber
Befestigungsbohrungen für den Griff : 22.2
Befestigungsbohrungen für Spiegel : 10mm
*Wenn Ihr Motorrad zum Zeitpunkt des Wechsels auf den Lichthebelhalter den Serienhebelschalter hat, wird die Verkabelung zum Serienhebelhalter zusammen mit der Verkabelung zum Lichthebelhalter vom Hauptkabelbaum getrennt, so dass Sie die Zelle nicht drehen können, selbst wenn Sie den Kupplungshebel halten und den Zellenknopf drücken.
*Schließen Sie daher bitte direkt an die beiden vom Hauptkabelbaum kommenden Drähte an, um die Zelle zu drehen.
*Wenn die Drähte nicht abgetrennt sind, müssen Sie sie möglicherweise modifizieren.
*Wenn sich Ihr Fahrrad aufgrund eines verrosteten Kupplungsdrahts stark bewegt, müssen Sie den Draht durch einen neuen ersetzen.
*Beim Einbau des Kupplungsdrahtes müssen Sie das freie Spiel vor dem Einbau maximieren, sonst wird der Draht flach und Sie können ihn nicht einbauen.
*Nach der Installation stellen Sie bitte das Drahtspiel wieder auf normal ein.
*Es ist nicht möglich, ihn in Honda-Fahrzeuge einzubauen, bei denen der linke Schaltkasten im Hebelanbauteil integriert ist.
*Nicht installierbare Modelle(CB750KO?K6/CB550F/CB500F/CB400F/CB350F/HAWK alle Modelle)
Color: Silver
Handlebar mounting holes: 22.2
Mirror mounting holes: 10mm
*When you replace the lever holder with a light clutch lever holder, if your bike has a stock lever switch, the wiring for the stock holder will also be disconnected from the main harness, so the starter will not work even if you hold the clutch lever and press the starter button.
*Therefore, if you connect the two wires from the main harness directly, the starter will turn.
*If the wiring is not disconnected, it is necessary to modify the wiring, so please have it installed at a motorcycle shop.
*Please note that if the clutch wire itself is rusted inside and the movement of the bike is heavy, it will not become lighter unless the wire is replaced with a new one.
*When installing the clutch wire, first make sure that the clutch wire has the maximum amount of space before installation, otherwise the wire will become flat and cannot be installed.
*Please adjust the space of the wire to normal condition after installation again.
*This product cannot be installed on Honda or other vehicles with an integrated left switch box.
*Uninstallable models (CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / All HAWK series models etc.)