Ein digitales Drehmomentmessgerät, das zwischen Handgriffen und Steckdosen installiert wird..
Zwei Messmodi (Spitzenwertmodus und Spurmodus) können ausgewählt werden.. Sie entspricht sowohl der linken als auch der rechten Drehrichtung..
Überdrehmoment-Verhinderungsfunktion, die Sie mit einem intermittierenden Summerton benachrichtigt, wenn das Zieldrehmoment erreicht ist.
Der Summerstart kann zwischen 50% und 95% des Zieldrehmoments eingestellt werden.
Ablaufdatum des Kalibrierzertifikats
1. Falls unbenutzt: Bis zu einem Jahr ab dem Kalibrierdatum des Kalibrierzertifikats..
2. Wenn Sie das Zertifikat für weniger als ein Jahr ab dem Kalibrierungsdatum verwenden: Ein Jahr ab Beginn der Verwendung..
Reparatur und Inspektion
Raue Handhabung, längere Lagerung und häufiger Gebrauch können dazu führen, dass die Genauigkeit unregelmäßig wird.. Wenn Genauigkeit erforderlich ist, bitten Sie um regelmäßige Inspektionen (gegen Gebühr)..
Eine periodische Inspektion der Drehmomentausrüstung ist erforderlich.. Als allgemeine Faustregel gilt: Führen Sie periodische Inspektionen einmal pro Jahr durch (gegen Gebühr)..
Bitte kontaktieren Sie Ihren Händler oder das TONE-Verkaufsbüro für weitere Informationen..
It is a digital torque measuring instrument to be used between a manual handle such as a ratchet handle, a spinner handle and a socket.
Two measurement modes(peak mode and track mode) can be switched.It can be used in both directions of rotation.
Equipped with an overtorque prevention function that notifies you with a buzzer sound(intermittent) when you approach the target torque.
The start of the buzzer can be set in the range of 50%-95% of the target torque.
■Expiration date of calibration certificate
1. if not used: Up to one year from the calibration date of the calibration certificate.
2. if you start using the product less than one year after the calibration date on the calibration certificate: One year from the start of use.
■Repair and Inspection
・The accuracy may deviate due to rough handling, leaving the instrument for a long time, or frequent use.If accuracy is required, ask for periodic inspection(chargeable).
・Periodic inspection is required for torque equipment.Periodic inspection should be carried out once a year as a guide(at cost).
・Please contact your dealer or TONE sales office for further information.