Sobald Sie die Option, Schätzung Lieferzeit wählen wird angezeigt.
* Versanddatum und Schätzung Ankunftszeit nicht garantieren.
Sobald Ihre Aufträge erteilt werden, werden wir den Bestand des Herstellers überprüfen und Sie die bestätigte Lieferzeit per E-Mail senden.
Form eines Schwingarmrohrs] Seltsam geformter Querschnitt (dreifach quadratisch) Größe des Schwenkarmrohrs] 95 mm lang x 40 mm breit (2,5 mm dick) Material]Außerordentlich Duraluminium 7N01
Normale Länge Verwenden Sie die normale Achswelle (Φ25) Kann mit echten Bremssätteln ausgestattet werden. Kann als Bolt-on montiert werden.
*Bild 2 ist eine Oberflächenbehandlung: Cerakote. *Bitte kalkulieren Sie 2-3 Monate für die Lieferung ein, da dieses Produkt auf Bestellung gefertigt wird. *Die anderen Optionen sind bei webike nicht verfügbar. *ABS-Modell nicht verfügbar. *Modell SUPER BOLDOR nicht verfügbar. *Innere Kotflügel können bei einigen Herstellern stören.
[Chain adjuster frame color] Hard anodized
[Swingarm pipe shape] Different type of cross section (triple square)
[Swingarm pipe size] 95mm (L) x 40mm (W) (Thickness 2.5mm)
[Material] ・Main pipe: Super duralumin 7N01 material, chain adjuster: A5083 material / OW type ・Pipot part: Machined
[Pivot part] Equipped with ball bearings and needle bearings
[Chain adjuster] OW type
[Adjustable range] -20mm to +40mm from stock
[Axle shafts] Stock parts reused
[Brake] Stock compatible
[Wheel] Stock compatible
*webike does not accept options other than those listed here. *Installation on ABS vehicles up to model year 13 has not been tested. *Installation on '18 and later models has not been tested. *Change of Axle width and oil catch tank specification are not available. *Inner fenders may interfere with some manufacturers. *The option of adding a brake hose clamp (product number ending in 009) is to fix it to the inside of the swingarm.Stock clamp parts cannot be used. *Rear fender is sold separately.Not tested except for STRIKER rear fender. *When replacing the sprocket or changing the ride height, be careful to keep the clearance between the chain and the swingarm. *The image shown is with the option added. *The image may contain other colors and products. *There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* Dieses Produkt wird nach einer Bestellung vorgenommen werden, werden wir currect Lieferzeit feststellen, nachdem wir einen Auftrag empfangen.
Dieser Artikel * kann nicht storniert werden, kehrte noch Austausch nach der Bestellung.
* Das Bild ist nur als Referenz. Das gezeigte Bild kann vom tatsächlichen Produkt abweichen.
G-STRIKER Schwingarm -GILDdesign X STRIKER Kollaborationsschwinge
Die Entwicklung des Projekts begann mit einem Wort von Stürmer Shin.
"Ich möchte den Schwenkarm für eine bessere Drehfähigkeit beugen.
Das Projekt wurde gestartet, um dieser Nachfrage gerecht zu werden.. Die Konstruktion der Schwinge beginnt mit der Auswahl der zu verwendenden Reifen.. Im Vorgriff auf die jüngsten High-Grip-Reifen haben wir eine Reihe von Tests durchgeführt und die Steifigkeit durch Untersuchung der Rohrform, der Wandstärke und der Knotenbleche (Verstärkung) optimiert..
7N01 Aluminiumrohr Das Hauptrohr besteht aus einer hochfesten Aluminiumlegierung mit ausgezeichneter Schweißbarkeit und wird für Flugzeug- und Maschinenteile verwendet.. Wir verwenden das Material 7N01, das als "Super Duralumin" bezeichnet wird, das der Aluminiumlegierung "Super Duralumin" überlegen ist, und sogar noch höher als das Super Duralumin..
Das Rohr hat eine Länge von 95 mm und eine Breite von 40 mm (2,5 mm dick) mit einem dreifach-quadratischen Querschnitt und wurde auf der Grundlage des Konzepts "starke Längssteifigkeit und angemessene Querfederung" entworfen.. Das stilvolle Design, das durch den dreifachen quadratischen Querschnitt entsteht, macht Ihr Motorrad noch anpassungsfähiger..
Pivot-Struktur Diese Struktur wird von den Spitzenteams in der All Japan Road Race Championship (JSB-Klasse) verwendet, und natürlich wird nach dem Schweißen eine koaxiale Bearbeitung durchgeführt, um Genauigkeit zu erzielen.. Jedes Lager wird in Japan mit hoher Zuverlässigkeit hergestellt und gewährleistet einen zuverlässigen Betrieb..
Seriennummer Seriennummern sind auf der Vorderseite des Drehzapfens eingefräst.
Kettenabzieher -Verkürzt zur Verbesserung der Drehfähigkeit und länger zur Erzielung von Stabilität Verglichen mit der Schaftlänge dient die Einstellung -20 mm der Verbesserung der Drehfähigkeit bei kurzem Radstand, während die Einstellung +40 mm bei langem Radstand für eine Vielzahl von Anpassungen und Stabilität sorgt..
OW-Kettenzug Die konische Ausführung des OW-Typs vergrößert die Kontaktfläche und zieht die Achswelle fest, um die Steifigkeit zu erhöhen..
Farbig eloxierter Kettenabzieher Für den Kettenabzieher sind drei Farben aus eloxiertem Aluminium erhältlich (hart, schwarz und rot). Sie können Ihre Lieblingsfarbe ohne Preisänderung wählen.
[Beschreibung der Option]
Oberflächenbehandlung - Schwabbeln - (Standard-Spezifikationen) Jede Pfeife wird von Kunsthandwerkern von Hand geschliffen und gespiegelt. Wartung ist erforderlich, um den Glanz zu erhalten, aber Sie können den ursprünglichen Glanz von Aluminium genießen..
Oberflächenbehandlung -CeraCoat- (+30000yen) Keramik wird von einer Spezialmaschine zerkleinert und der Farbe beigemischt, um die Festigkeit des Farbfilms zu verbessern.. Die Oberfläche ist sehr dünn (25 Mikrometer) und hat eine hochwertige Haptik.. Wir haben Köpfe, Flansche, Auspuffrohre usw. für das US-Militär, Waffenhersteller und US-Schlepprennen geliefert... Es ist beständig gegen Abrieb, Verschleiß, Stoß, hohe Temperaturen, Bremsenreiniger und Benzin.. Dies ist das erste Mal, dass G-STRIKER CeraCote auf dem heimischen Motorradmarkt verwendet.. Wir sind stolz darauf, diese Oberflächenbehandlung zu empfehlen.
Für weitere Informationen über Cerakote sehen Sie sich bitte das Video unten an.
Zusätzliche Kettenabdeckung (+3000yen) Schweißen Sie die Strebe an den Schwingarm, an dem die Kettenabdeckung befestigt werden kann.. (Ein Aufenthalt ist hinten inbegriffen). Änderbar für deckellos, Umschlagart und -stil. *Je nach Form kann eine Änderung der Kettenabdeckung erforderlich sein.. *Die Stryker-Schwinge ist an zwei Stellen gesichert.
Bremsschlauch-Klemmverfahren (+1000yen) Einbetten der Mutter zur Befestigung der Bremsschlauchschellen. Durch Anbringen des Schlauchs an der Unterseite des Schwenkarmrohrs ist es möglich, um den Schlauch herum einen schönen Abschluss zu schaffen.. Kompatibler Schlauchdurchmesser: 8,5 mm
Die Basis des Standhakenbefestigungsverfahrens (+3000yen) Ständerhaken sind installiert, so dass Sie den Rennständer zur einfachen Wartung verwenden können.. Empfohlen für die tägliche Wartung und den Rundgang.. Sie können aus den folgenden Größen wählen. Durchmesser der Befestigungsschraube M8XP1.25 Durchmesser der Befestigungsschraube M10XP1.25 *Standhaken ist nicht enthalten..
●G-STRIKER Swingarm -GILDdesign x STRIKER Collaboration Swingarm
The impetus for development came from a comment made by Mr. Shin, a member of Striker.
Would like to bend the swingarm for better turning performance
In order to respond to this request, this project has been started. The design of the swingarm begins with the selection of the tires to be used. The pipe shape, wall thickness, and gusset (reinforcement) have been tested to optimize the rigidity in anticipation of recent high-grip tires.
●7N01 material aluminum pipe Main Pipe is an aluminum alloy with the highest strength and excellent weldability, and is an extremely strong material used for aircraft and machine parts. It is made of 7N01 material, which is called super duralumin, which is superior to duralumin, an aluminum alloy.
The pipe size is 95 mm (length) x 40 mm (width) (2.5 mm thickness) with a triple square cross-section, designed with the concept of "strong longitudinal rigidity and moderate lateral smoothness." The stylish design created by the triple square cross section will further customize your motorcycle.
●Pivot structure The structure is adopted by the top team of all Japan road race championship (JSB class). After welding, the coaxial processing is naturally done for the accuracy. Each bearing is made in Japan with high reliability to ensure reliable operation.
●Serial Number The serial number is machined into the front of the pivot.
●Chain adjuster Improved turning performance by shortening the length and stability by lengthening the length Compared to stock length, -20mm setting is for better turning performance with short wheelbase, and +40mm setting is for various customization and stability with long wheelbase.
●OW chain adjuster The tapered OW type structure is designed to increase the contact area and tighten the axle shaft to increase the rigidity.
●Chain adjuster Color anodized aluminum The chain adjuster is anodized in three colors (hard, black and red). You can choose the color of your choice without changing the price.
[Description on options]
●Surface treatment -Buffing treatment- (Standard specification) Each pipe is polished by hand and buffed to a mirror finish by our craftsmen. Although maintenance is required to keep the shine, you can enjoy the original shine of aluminum.
●Surface treatment -Cerakote- (+30000yen) Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film. The surface of the coating is very thin (25 microns) and has a high quality feel. As the results, the head, the flange part, the exhaust pipe, etc. of the U.S. military unit, each gun manufacturer, and U.S. drag racing... It is resistant to abrasion, wear, impact, high temperature, brake cleaner and gasoline. Cerakote is the first adoption by G-STRIKER in the Japanese motorcycle market. This surface treatment recommended with confidence.
●Additional processing of chain cover bracket (+3000yen) Weld a bracket to the swingarm for the chain cover. (The back side comes with a special bracket) It can be changed to coverless or cover type according to your style. *In case of non-stock chain cover, modification may be required depending on the shape. *The Striker swingarm is fixed in two places.
●Brake hose clamp processing (+1000yen) Embed the nutter to secure the brake hose clamp.By fixing the hose on the back side of the swingarm pipe, you can finish the hose area beautifully. Compatible Hose Diameter: 8.5mm
●Stand hook attachment base processing (+3000yen) Install the stand hooks so that the racing stand can be used to easily raise and lower the vehicle during maintenance. It is recommended for daily maintenance and circuit use.Available in the following sizes. ・Mounting screw diameter M8 x P1.25 ・Mounting screw diameter M10 x P1.25 *Standing hook is not included.
●The stock brake hose clamp added for ABS vehicles (+3000yen) This is an option to fix the brake hose using the stock brake hose clamp for CB1300SF / SB ABS vehicles.
Vorsicht
* If there may be an instruction manual included, it will be written in Japanese.
Bitte wählen Sie Option, bevor in den Warenkorb legen.
WHY
?
THE LARGEST SHOP IN JAPAN
EXCLUSIVE COUPONS, SALE, DEALS
FAST, RELIABLE SHIPPING
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!