- Motorradteile
- Motorteile
- Zündungsteile
- Zündkerzen
- NGK
- NGK - Zündkerzen
- Produktliste
- Standardstecker BR8ES 3961
Standardstecker BR8ES 3961
Product # BR8ES
2.42 EUR (396 JPY)
List price: 2.75 EUR Save 12%
+4 Webike Punkt (0.02 EUR)
Product # BR8ES
2.42 EUR (396 JPY)
List price: 2.75 EUR Save 12%
+4 Webike Punkt (0.02 EUR)
[NGK-Stecker-Funktionen] |
- Es ist ein Super-"Wide Range"-Stecker - |
Die zentrale Elektrode ist mit einem Kupferkern konstruiert, der bis zur Spitze umschlossen ist, um eine große Wärmemenge schnell abzugeben.. Als Ergebnis wurde ein Ultra-Weitbereichspfropfen erreicht, der resistent gegen Brennen und Schwelen ist.. |
Vergleicht man die thermischen Eigenschaften von Steckern mit und ohne Kupferkern, so zeichnen sich Stecker mit Kupferkern durch hervorragende thermische Eigenschaften und Fleckenbeständigkeit aus und haben einen größeren thermischen Bereich.. |
Heizwert des Steckers |
- Das hochtonerdehaltige Porzellan von New Ceramics wird als Isolator verwendet. |
Ausgezeichnete Isolierung bei hohen Temperaturen und zuverlässige Funkenbildung. Gute Wärmeleitfähigkeit zur Vermeidung von Überkochen. Ausgezeichnete mechanische Festigkeit und Beständigkeit gegen Wärmeschock (schnelles Aufheizen und Abkühlen). |
- Die Struktur ist stark und luftdicht - |
Ausgezeichnete Luftdichtheit und strukturelle Festigkeit, da der Isolator und die Hauptarmaturen durch Spezialpulver verbunden sind.. |
Spezielle Elektroden aus einer Nickellegierung werden für eine ausgezeichnete Haltbarkeit verwendet.. |
- Wellungen im Isolator gewährleisten die Isolierung und verhindern Überschläge. |
Zwischen dem Terminal und den Hauptanlagen im Park wird ständig Hochspannung angelegt.. Hohe Spannungen neigen dazu, entlang der Oberfläche des Isolators zu streuen, und je höher die erforderliche Spannung zwischen den Funkenstrecken ist, desto wahrscheinlicher wird ein Überschlag auftreten.. Um einen Überschlag zu verhindern, sind Isolatorwellungen vorzusehen und der Abstand zwischen der Klemme und den wichtigsten Metallteilen zu vergrößern, um die Isolierung zu gewährleisten und einen Überschlag zu verhindern.. |
Was ist ein Flashover... |
Der Funke soll zwischen dem Terminal und der Hauptarmatur überspringen, wie auf dem Bild zu sehen. |
Überschlag |
Ausgezeichnete Stecker. |
[Features of NGK plug] |
- This is a super "wide range" plug - |
The center electrode , The center electrode is a "copper cored" construction with copper sealed to near the tip to allow a large amount of heat to escape quickly. The result is an ultra "wide range" plug that is resistant to burning and smoldering. |
Comparing the thermal characteristics of plugs with copper cores and plugs without copper cores, the plugs with copper cores have superior thermal characteristics and fouling resistance, and a wider thermal range. |
■ Heat value of the plug |
- High alumina porcelain from New Ceramics is used as the insulator - |
- Excellent insulation at high temperature and reliable sparking. ・Excellent heat conductivity and prevents seizure. ・High thermal shock resistance (rapid heating and cooling) and excellent mechanical strength. |
- Strong and airtight in construction - |
Because the insulator and the main metal fittings are joined by special powder, it is excellent in airtightness and strong in structure. |
Special Nickel alloy electrodes are used for superior durability. |
- Corrugations in the insulator ensure good insulation and prevent flashover - |
During sparking, a high voltage is constantly applied between the terminal and the main unit bracket. High voltages try to leak along the surface of the insulator and flashover is more likely to occur if the required voltage between the spark gaps is high. In order to prevent flashover, insulator corrugations (folds) are provided to increase the insulator surface distance between the terminal and the main fittings to ensure insulation and prevent flashover. |
What is a flashover... |
It is a spark between the terminal and the main unit fitting as shown in the image. |
■ Flashover |
■The advantages of the plug |
Model Page Links
4.5 / 5
750 Bewertungen
It uses for 2021 YZ125X. The Plug which is originally encouraged by OEM is BR9EVX, but the price is a little high in Windshield IRIDIUM, and there is also the fact that it is exchanged immediately when it is covered, so I am using Normal plug. I tried Standard Type No.9, but it was No.8 that I felt stable in any situation. I also tried Standard Type No.9, but I feel No.8 is more stable in any situation. However, I feel No.9 is more stretchable in Motocross course with high rpm. Because there is a lot of all-round use recently, I thought that it was here.View Detail
2-StokeEngine and BR8ESPlug are strong for CUB re.
This is Data after a long time of use.View Detail
I used it in the 2nd HusabergTE125 Plug.
I think the 2ndRacer with mixed oil is fine with this regular Plug, I feel like I'd be better off replacing the regular Plug with a new state of blistering than the Racing plug or Windshield IRIDIUM.
View Detail
I used it to replace the Plug periodically on my CRM250RR. 2ST has a lot of ignition times, so I also used a spare I bought it including There is no problem at all NGKView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Bitte wählen Sie Option, bevor in den Warenkorb legen.
Kundendienst
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.