Gen 2 Yellow Busa: HAYABUSA Custom
STRIKER's HAYABUSA
The distinctive yellow cowls and STRIKER logo written on each side. This is a Gen 2 Hayabusa built by STRIKER WORKS. This bike consists of STRIKER's products and other manufacturers' dealt with by ACTIVE. Hayabusa is used in a variety of styles because of its versatility and amazing performance, which are typical of Suzuki's flagship models. However, the longer it is ridden, the more care should be taken when replacing consumables.
Consumables are, for example, bearings and brake discs. You should properly maintain these parts and keep in good condition. There are not many cases where the swingarm and its surrounding parts go fatally bad, but as the distance increases, you may become concerned. Replacing consumable parts during an overhaul, after confirming that there are no problems, will only increase your peace of mind. That is why it is advisable to check the swingarm and its surrounding parts at 50,000 to 60,000 km. Such maintenance should be done well so that the Hayabusa can withstand long-distance riding.
Bodyworks
The double bubble windshield is a Zero Gravity BusaTomo spec., and the mirrors are OEM parts of GSX-R1000. Moreover, The headlight bulbs are LEDs from Sphere Light.
Wrapping from the front, through the sides, and around to the tail was done by DETO RACING. And the fender eliminator kit was made by Daytona.
The seat is a STRIKER custom seat with a different skin pattern on the seating area and front edge/both sides. The Busa-Tomo.Net logo appears on the side.
Engine
The engine and frame was remained to be stock. STRIKER's radiator core guard and guard sliders (carbon composite) were added.
Intake & Exhaust
For the exhaust system, STRIKER's titanium exhaust is installed. It has been connected to a one-off silencer made by Wheelie Kids when photographed. The rear shocks are Hyperpro.
Handle
The top bridge is made by Hurricane. ABM's rigid-mounted clip-on handlebar is finely positionable. The left and right master cylinders are Gale Speed VRC, and the grips are fitted with Honda OEM Grip Heaters. The LEDs' color in the gauges are change to blue.
Chassis
The front forks incorporated Hyperpro's springs, and the front axle shafts have been replaced with the Radical's made of chromoly. The front fender is fitted with Nexray Carbon Dry. The front brakes are Hayabusa's stock Brembo calipers and ACTIVE's Cross lock disc rotors.
The swingarm is a G-striker, and the front and rear wheels are Gale Speed TYPE-S 3.50-17/6.00-17 sizes. Steps are STRIKER's products, including pillion steps.
Gallery
Specifications
Part | Details |
---|---|
Engine |
STRIKER Radiator Core Guard & Oil Cooler Guard Set STRIKER Guard Slider |
Carb / Intake |
STRIKER STREET CONCEPT Full Exhaust System WHEELIE KIDS Tinanium Silencer One-Off |
Frame | STRIKER G-Striker Swingarm Power Dimension Type-S](/products/23654502.html "STRIKER G-Striker Swingarm Power Dimension Type-S") |
Brake |
GALE SPEED Elaborate Master Cylinder [VRE Series] Brake Master GALE SPEED Cross Lock Disc Rotors (Front) |
Wheels |
RADICAL Chromoly Axle Shaft GALE SPEED TYPE-S Wheels 3.50-17/6.00-17 |
Suspension |
HYPERPRO Front Spring HYPERPRO Mono Shock T463Q Piggyback Linear Rate |
Steps | STRIKER Sports Touring Concept ”STC” STEP KIT 4Positon STRIKER Sports Touring concept Original Pillion Step Bar STC |
Handle / Steering |
HURRICANE Duralumin Top Bridge ABM Multiclip Clip-on Handlebar HONDA OEM Sport Glip Heater GALE SPEED VRC Clutch Master |
Seat | STRIKER Custom Seat |
Bodyworks | ZEROGRAVITY Windshield [Double Bubble] [BUSA-TOMO Specification] DAYTONA LED Fender Eliminator Kit NEXRAY CARBON DRY Front Fender |
Electrical | SPHERE LIGHT LED Head Light valve HEALTECH ELECTRONICS FI Tuner Pro Fuel Condition Controller HEALTECH ELECTRONICS Quick Shifter Easy HEALTECH ELECTRONICS X-TRE Power Box |
About STRIKER
Based on technologies cultivated in race scenes, STRIKER is a brand producing exhausts and rear set kits designed for motorcycle dedicated model. They are profesional parts bulider who creates high quality performance parts compatible with Japan made motorcycle including Kawasaki and Honda.
Original Source of this Article
Heritage & Legends
editor
Hakuyo
A foreigner who rides in Japan, Japanese call this "Gaijin Rider". Third year in the Webike global team. He feels and shares the real bike life in Japan then presents you how interesting Japanese customs are.