- fits:
- KAWASAKI Z2H2B
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI 250SS MACHI (S1) S1B
- KAWASAKI 250SS MACHI (S1) S1C
- KAWASAKI 400SS MACHII (S3)
- ...und mehr.
The old one was still leaking gas, so we replaced it with a new one to refresh the system.No more leaks and it feels good to be clean.But be careful not to add too much Gasoline!It's always leaked bef...Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
Used for Drain hose on TM-MJN24.I think the Oil Resistant Hose sold at home centers is fine, but most of the ones sold at home centers are pink, and the long hose does not look good, so I bought it ev...Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
When I changed from the NORMAL 4-pipe exhaust system to a set of tubes, the stopper on the side stand was lost and when I removed the stand, the stand was hit by the frame. In that case, this Damper r...Weiterlesen - fits:
- KAWASAKI
- KAWASAKI 500SS Mach III (H1) H1A
- KAWASAKI
- KAWASAKI W1 S/SA sadist
This is a good looking fuel cap and fits well but the rubber seal swells up in contact with petrol and will have to be replaced.Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
I received the product today.I have not installed it yet, but the finish is good and the BlinkerCable terminal can be passed through without any problem.Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
It is soft for a fuel hose, and the accuracy is moderate, but it is so soft that the hose bends in the middle. If the hose is bent, the fuel will stop, so you need to check it from time to time and be...Weiterlesen - fits:
- KAWASAKI H2
- KAWASAKI 750SS MACHIV (H2) H2A
- KAWASAKI 500SS MACHIII (H1) H1C
- KAWASAKI 500SS MACHIII (H1) H1B
I think these might fit my s1 250 but i havnt recieved previous order. so not sure about ordering these regards Ian hiscoxWeiterlesen - ClampDurch DOREMI COLLECTIONfits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
I decided to revamp the Clamp while I was unloading the Carburetor, so I bought itThe Screw is also painted black, and the Screw is not noticeable when it is installed, so it looks calm I thought it w...Weiterlesen - fits:
- KAWASAKI KH400
- KAWASAKI KH250
- KAWASAKI 500SS MACHIII (H1) H1C
- KAWASAKI 500SS MACHIII (H1) H1B
- KAWASAKI 500SS MACHIII (H1) H1A
- ...und mehr.
I'm glad I could still make it.Rubber parts are particularly difficult to make by themselves,Reproduct is appreciated.It is Large strange to maintain and manage Motorcycle 40 years ago.Weiterlesen - fits:
- KAWASAKI KH500
- KAWASAKI H2
- KAWASAKI 750SS MACHIV (H2) H2C
- KAWASAKI 750SS MACHIV (H2) H2B
- KAWASAKI 750SS MACHIV (H2) H2A
- ...und mehr.
In use in H1E.The included Inner Parts are different (Described in the description) Recompose what you were using.I was worried about the wall thickness of Tube, but it seems to be safe to use the sam...Weiterlesen - fits:
- KAWASAKI W1 S/SA 71-72
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
all in all a nice piece, certainly better than old pitted original,
chrome plating is good, and fit is generally fine, i'd buy another of these caps for the next bike,Weiterlesen - fits:
- KAWASAKI
This product is absolutely magnificent.
High quality components.
Assembly on the bike was plug-and-play, very easy.Weiterlesen - fits:
- KAWASAKI
- KAWASAKI 750SS Mach IV (H2) 72-75
- KAWASAKI 500SS Mach III (H1) 69-76
I used it for overhaul of negative pressure Cook. OEM is a missing item so we rely on this product. Packing classes are all included, so it was completed without problem. Good negative pressure, satis...Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
Because it is MileMeter, purchase for vehicle inspection measures.Since it is not actually running, I am worried whether it can be confirmed at the time of driving, but because it is for vehicle inspe...Weiterlesen - fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
I used it for Battery hose of VF 750F.OEMBattery hose of VF 750F is already out of print.It was a little thin, but it was enough.Also, I used Fuel Hose of 3 φ because I did not want to replace it with...Weiterlesen - fits:
- KAWASAKI 350SS MACHII (S2) S2A
- KAWASAKI 400SS MACHII (S3)
- KAWASAKI 400SS MACHII (S3) S3A
- KAWASAKI 500SS MACHIII (H1) H1B
- KAWASAKI 500SS MACHIII (H1) H1D
- ...und mehr.
I used it for Overhaul of OEMCaliper. It is making like OEM. Oil leakage etc. It can be used without problem. The same is true for braking.Weiterlesen - fits:
- KAWASAKI W1 S/SA 71-72
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
Although it was used for the 350SS first stage type Tank, it has attached satisfactorily.Structure was also good and attachment was also satisfactory.It is touch that Plating portion does not need to ...Weiterlesen - fits:
- KAWASAKI W1 S/SA 71-72
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
It´s a very, very nice Replica, best quality gascap!!!
It works on my selfmade KAWASAKI S2-R I´ve build in the year 2012.
Best Regards, RobertWeiterlesen - fits:
- KAWASAKI 250SS MACHI (S1) S1B
- KAWASAKI 500SS MACHIII (H1) H1E
- KAWASAKI 500SS MACHIII (H1) H1F
- KAWASAKI 250SS MACHI (S1) S1C
- KAWASAKI 350SS MACHII (S2) S2A
- ...und mehr.
A price is also cheap and a form is also beautiful.
Although there is also a portion with coarse finishing for a while, it is conviction, considering a price.
The color is half-Luster black.
Weiterlesen - fits:
- KAWASAKI 500SS Mach III (H1) H1 B
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...und mehr.
This Sim is a thing which uses with a bond to the flesh side of a brake pad sticking. The more round one to the pat by the side of a piston sticks the evener one on a front in the center towards a tai...Weiterlesen
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING